PjFish
Supporting Member
Nice! Last year I dropped my tv several feet as well to eye level found that sweet spot..Such a difference!! No more bent necks lol
Patrick's 81G - the last dance
- Thread starter finalphaze987
- Start date
With your current clean setup, imagine how you'd feel if you got an acrylic and it starts getting all the scratches that are very very easy to get on acrylic. Your current setup looks good now, and will continue looking good longer than the acrylic version!
(my first reef tank back in the day was acrylic and I'm team glass now)
(my first reef tank back in the day was acrylic and I'm team glass now)
MarcosDelgado0
Supporting Member
Enabling mode turned off, you have one of the cleanest setups I’ve ever seen. I don’t think it can get better than this. I’d have no regrets running with this setup and hope to achieve this level someday. I’ll agree with Richie here
finalphaze987
Supporting Member
What's crazy is the lid I ordered for this glass tank is almost as much as swapping it out to an acrylic one from them! Kicking myself over that.It’s funny because months before I got my low boy, I had hit up John for a quote but he never replied lol. So I just got the low boy because I got tired waiting. It was always in the back of my head that I should’ve figured out how to get that acrylic tank. Then @SupraSaltyReefer came along and I ended up with the tank. It kinda sucks because I have to start over again essentially lol but I know in the end I’ll be happier. Just food for thought… still got time for that 25% off
Hard to pass up a deal like that...especially when your on a forum full of enablers..haha
MarcosDelgado0
Supporting Member
Yeah John’s running some really good deals right now. Early Black Friday lol
I'm all for enabling, but in your case I think the benefits of acrylic you're past. The main benefits are ease of moving, install, drilling, and possible cost versus low iron glass.
You've already gotten the glass version, it's drilled, and carried into place. Presumably it's low iron glass so almost as clear.
I think at this point it'd be all negatives versus what you have. Much much easier to scratch (can't even have some urchins), you'd need to build it out, and you'd need to move/sell the existing one.
You've got the best already!
Last edited:
Reefer Madness
Supporting Member
Keep the glass and have a spare?
MichaelB
Supporting Member
Oh I thought he was talking about getting a 2nd tank, not swaping current one, his set up is so dang awesome i wouldn't change anything at all. Its like a magzine cover and doesn't even have water yet.
finalphaze987
Supporting Member
I used to get still necks when binge watching Netflix and got the mantle mount to lower the TV...your right, the difference is night and day..the soundbar sounds better, we can raise it back up when not watching, and no pain!
With all the ergo enhancements I've made at work and my home office, I'm surprised I didn't get one of these earlier.
That was my biggest fear with acrylic...scraping the coraline and hearing the blade dig into the pane..the first time this happened on my old TruVu, my previous neighbor called the police to do a "wellness" check on me and ensure there was no domestic violence going on..
All they found was an old Filipino lady (my mom) yelling at me to stop cussing...
You're right, my OCD wouldn't fare well with something like that again..
finalphaze987
Supporting Member
@richiev gave me the feedback I needed..if I didn't have the tank yet, I would have jumped on the deal right away and went acrylic...but I did forget some of my experiences with acrylic that I would find difficult to accept now..when it's difficult for me to clean, it gives me more reason to put it off..
MarcosDelgado0
Supporting Member
This will be my first acrylic tank so I’m interested in seeing how it’ll go. I hear all the stories but I feel like it’s one of those things you have to personally experience to really understand. Maybe I’ll end up regretting it and going back to glass lol
finalphaze987
Supporting Member
Seeing the clarity when you fill it for the first time is unforgettable... But when you do scratch it, don't curse up a storm like the 16 year old me...I was broke and didn't buy the proper scrapers..working at Pacific Sunwear in 96-97 for $4.25/hr , I figured I'd save a couple bucks...big mistake on my part
Yeah, it's not that acrylic is bad, it's just not superior if you already have a glass one in place. There's a lot of nice benefits to acrylic in terms of setup and configurability; very nice to be able to move a 100 gallon tank with no effort or worry if you set it down wrong it's going to chip. It's also very clear.
You just need to be very very careful not to scratch it. It wouldn't be an awful idea to buy a small piece of acrylic from the local hardware store and run a scraper on it just to learn what you can or can't do. Also make sure you buy acrylic compatible scrapers (or use an old credit card), never let sand get caught in the scraper, and I'd be very careful with any cloth style scrapers.
It'll be great, and if it isn't you can always get another!
I've always wondered if some day they'll release a product similar to what F1 drivers use on their masks. A series of removable plastic covers where you just rip off the outer one and toss it, leaving you with a perfectly clear viewing area. Maybe install a new set every 6 months somehow. Alternatively a double pane glass style setup where the inner piece can be removed to be soaked in cytric acid. Has to be something that's doable beyond scraping inside the aquarium.
derek_SR
Supporting Member
Just mentally prepare yourself for scratches, they are 100% inevitable. You can minimize the damage to hairline scratches that are generally difficult to see, if you're careful. Those aren't that big of a deal IMO. But keeping the glass clean regularly without scratching is the most annoying part of owning an acrylic tank.
That's what public aquariums do for the back panel. Just rotate out an opaque blue or black background so you never have to scrape the back. Then just soak the other in citric acid.
finalphaze987
Supporting Member
Finally got around to unboxing a couple items that came in earlier this week. I picked up the Geo kalk rx and algae rx in red. Took a while to build, but with the hurricane hitting that area, very understandable.
Both fit nicely under the stand, but the more red I get the more the blue on the Fiji sump starts to bug me. A little late to turn back given the plumbing is done, so I'll learn to live with it. Still gotta run the lines and do some wire management, so excuse the mess.
Picked up a plank as well to get the measurements for the lid position. I was thinking of picking up a neptune one for the left side of the tank to feed pellets, while I stick to the reef jerky for the plank.
Things are starting to shape up...going to work on the RODI / water mixing station in the garage next before filling. If I have to do it all manually and change water in this cold weather, it'll give me more of a reason to put it off till later, so I gotta make it as easy as possible.
Both fit nicely under the stand, but the more red I get the more the blue on the Fiji sump starts to bug me. A little late to turn back given the plumbing is done, so I'll learn to live with it. Still gotta run the lines and do some wire management, so excuse the mess.
Picked up a plank as well to get the measurements for the lid position. I was thinking of picking up a neptune one for the left side of the tank to feed pellets, while I stick to the reef jerky for the plank.
Things are starting to shape up...going to work on the RODI / water mixing station in the garage next before filling. If I have to do it all manually and change water in this cold weather, it'll give me more of a reason to put it off till later, so I gotta make it as easy as possible.
finalphaze987
Supporting Member
RO & saltwater mixing tanks came in today. Originally planned on getting an extruded aluminum rack to stack these one on top of the other, but was able to find a commercial wire rack that could hold the weight at a fraction of the cost.
The one on tip will be for RO water and have a float valve installed. A flood guardian will serve as a back up in case the float valve fails.
I'll valve off and T the bulkhead and have it feed the container via gravity. The bottom tank will house a gyre to mix and a heater.
With this setup, I should be able to have enough water to perform a large waterchange immediately if needed.
The one on tip will be for RO water and have a float valve installed. A flood guardian will serve as a back up in case the float valve fails.
I'll valve off and T the bulkhead and have it feed the container via gravity. The bottom tank will house a gyre to mix and a heater.
With this setup, I should be able to have enough water to perform a large waterchange immediately if needed.